comware-v7
HPE Comware v7
Configuration guides for HPE switches running Comware v7, including the 5130, 5510, 5940, and FlexFabric series.
Comware v7 is the current-generation HPE Comware operating system, running on the 5130, 5510, 5700, 5940, and FlexFabric series switches. It shares many concepts with Comware v5 but has a modernised CLI and additional features.
For HPE fixed-configuration Aruba switches, see ArubaOS-Switch (ProVision). For Comware v5 legacy platforms, see Comware v5.
- BFD Static Route Tracking on HPE Comware v7 How to use BFD echo mode with static route tracking on HPE Comware v7 for fast failover between primary and backup static routes without requiring BFD support on the remote peer.
- NTP Configuration on HPE Comware v7 Switches How to configure NTP time synchronisation on HPE Comware v7 switches, including BST summer-time offset for UK deployments.
- Policy Based Routing (PBR) on HPE Comware v7 How to configure Policy Based Routing on HPE Comware v7 to route traffic to different next-hops using ACL matching, applicable to VLAN interfaces and physical ports.
- Policy Based Routing Within a VRF/VPN-Instance on HPE Comware v7 How to configure PBR inside a VRF (VPN-Instance) on HPE Comware v7, routing internal traffic normally and redirecting internet traffic to a specific next-hop within the VRF.
- RADIUS Login Authentication on HPE Comware v7 Switches How to configure RADIUS authentication for management login on HPE Comware v7 using Microsoft NPS.
- VRF / VPN-Instance Inter-VLAN Routing on HPE Comware v7 How to configure multiple VRF/VPN-Instances on HPE Comware v7 with inter-VRF route leaking via BGP route targets.